So, I latterly had the risk to discuss with Victoria, BC for a bit of vacay, and bet the place I stopped up? The CoffeeGeek Lab, aka Mark Prince’s crib! (k, it used to be his really nice arts and crafts taste house). Where is sensory overload in case you are into espresso, regardless that numerous it’s tucked away. He came about to have an coffee gadget up at the take a look at bench, person who I may just most effective dream of proudly owning: a Lelit Bianca V3 gadget.
Let me let you know, that Lelit is absolute subsequent stage. You’ll be able to tweak your shot force in a minimum of 5 other ways:
- There’s a preinfusion mode that you’ll be able to program alternatively you favor.
- You’ll be able to get started your shot with a low waft atmosphere for a little bit.
- Or finish it with a low waft atmosphere.
- You’ll be able to manually regulate the force waft with this slick wooden lever on peak of the E61 grouphead, staring at the ahead mount force gauge for genuine time comments.
- For those who’ve were given it hooked as much as your plumbing, it may even use your own home’s water line force for some further oomph, handing over 40-55PSI water to the gadget’s traces and device.
And get this, you’ll be able to fiddle with that line force much more. Like, you’ll be able to have the water flowing to the grouphead at a gradual 1.5-2BAR with out even the use of the pump; that is accomplished through deft dealing with of the brew lever, enticing it, however no longer letting it click on the pump actuator piston.
It’s like a barista’s dream come true. And it’s a looker too. No marvel people name it an finish gamer.
However that’s no longer all. Mark additionally had this different gem at the bench, the Profitec GO. Now, this pretty piece of engineering is a unmarried boiler beast with the entire bells and whistles: PID controls, top-notch portions, all-metal construct – you identify it. And it’s were given a force gauge too. Positive, it doesn’t have a complicated preinfusion mode, however the GO has one thing else up its sleeve.
See, you’ll be able to in reality manually tweak the force throughout a shot through messing with the at once obtainable over force valve (OPV) by way of a brass screw proper on peak of the gadget. However right here’s the kicker – you don’t also have to do this to get some force profiling tips going down in this gadget.
The Force Profile Hack
Identical to the Gaggia Vintage Professional, you’ll be able to divert some water at the Profitec GO during the steam wand whilst pulling a shot. That lowers the force within the grouphead. So, through taking part in with the steam knob, you’ll be able to get started with low force and ramp it up as you cross. You’ll be able to additionally open the steam knob against the top of the shot, to cut back the overall brewing force. You get the entire advantages of a lever coffee shot with its declining force, however with the added advantages of a pump pushed, PID managed semi-automatic coffee gadget.
And right here’s the place it will get even cooler. The GO’s force gauge will provide you with real-time comments on what’s going down inside of. So, you’ll be able to fine-tune your force profile like a professional. Plus, because it’s PID-controlled and has a larger boiler, it handles temperature fluctuations approach higher than the Gaggia Vintage. The Vintage doesn’t have a PID to keep an eye on the temperature, and its boiler is 1/fifth the scale of the GO. The water debit from this trick is lovely prime, and the Gaggia can’t stay up, particularly in case you attempt to ramp down the force on the finish of a shot. Agree with me, I personal a Vintage Professional. I’ve been there. The GO, then again? Much more succesful.
This trick must paintings on any gadget that diverts water waft to the steam wand whilst you open the steam knob throughout a shot. You’ll be able to to find out in case your gadget is in a position to this, simple peasy.
Simply run a clean shot (no espresso used) during the grouphead and portafilter. While you see water popping out of the spouts, open the steam knob at the steam wand. If some water diverts, now additionally popping out of the wand, you’re golden.
If no water comes out of the steam wand, or the water stops flowing out of the grouphead, most effective flowing out the steam wand, the gadget has microswitch-activated solenoids that 100% divert pumped water to at least one aspect or the opposite, and this force trick can’t be achieved on them.
In case your gadget can do that force profile hack, smartly get in a position for numerous coffee brewing adventures forward!
